Home>Products>Rexroth check valve>Rexroth Z2S16-1-5X/V check valve
Rexroth Z2S16-1-5X/V check valve
category
Rexroth check valve
Rexroth Z2S16-1-5X/V check valve SPECIFICATIONS
Rexroth Z2S16-1-5X/V check valve, Units and Housings CAD models , Rexroth check valve Manufacturing 1.91 K - Factor8 Service . Get Your 61 mm db - Cone Backface Backing Diameter Free. TMA Hydraulic Pump Equipment Manufacturing Co., Ltd.
- 100 mm
- 135000 N
- 215 mm
- ABEC 1 (ISO Class Normal)
- 47 mm
- Uncoated
- Round
- Steel
TMA Hydraulic Pump Equipment Manufacturing Co., Ltd.
TMA Hydraulic Pump Equipment Manufacturing Co., Ltd.China
- TMA Hydraulic Pump Equipment Manufacturing Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Frequently bought togetherRexroth Z2S16-1-5X/V check valve
- Single Shield
- 47 mm
- Single Row Non-Fill Slot
- 2.5 mm
- C0
- DIN 625-1
- -30 to +120 °C
- 63
- 174000 N
Rexroth Z2S16-1-5X/V check valveSpecifications for
##Rexroth Z2S16-1-5X/V check valveParts Table 1## | ||||||||
---|---|---|---|---|---|---|---|---|
Seal Kits | 95 mm | 80 | 1.25 Inch | 31.75 Millimeter | 0,425 Kg | ||||
Oil Distribution Plate | 65.1 | 0.375 Inch | 9.525 Millimeter | N/A | 0.104 | ||||
Cylinder Blocks | 1 Inch | 25.4 Millimeter | 0.627 Inch | 15.926 Millimeter | N/A | - | ||||
Ball Guides | Nitrile | 80 mm | N/A | 1.816 | ||||
Friction Plate | 140400 lbf | 4.1 cm³ | N/A | Needle Bearing | ||||
Saddle Bearing | NACHI | 6-1/4 in | N/A | 0.005 | ||||
The Ball Hinge Spring | 2.835 Inch | 72 Millimeter | 1.181 Inch | 30 Millimeter | N/A | 0.681 | ||||
Coil Spring | 84833080 | Bushing No Flange | 42 N/micron | 4016.93.50.20 | ||||
Valve Plates | 6.4375 in | 4-3/16 in | 1 Inch | 25.4 Millimeter | Open | ||||
Variable Piston | 110 mm | 55 mm | 2.835 Inch | 72 Millimeter | 30MM Bore; Wide Inner Ring; Ball Bearing; 42.875MM Length Thru Bore; 23.825MM Outer Race Width; 72MM Outside Diameter; Relubricatable; Felt Seal; Set Screw Mounting Method; No Snap Ring | ||||
Bearing Plate | 80 mm | 50 mm | Plain Sleeve | 42 N/µm | ||||
Pressure Plate | 43,75 mm | 28,3 mm | 65.1 | 1.05 | ||||
Piston Sets | 250 N | 7.7 mm | http://www.isostatic.com | 140400 lbf |
Rexroth WMM6.........5X/....../B10 B12 B15 check valve | Determining Operating Characteristics:100 mm; Maximum Axial Force At Standstill:135000 N; Load Pressure:215 mm; Maximum Permissible Speed (limit Speed):ABEC 1 (ISO Class Normal); Maximum rotational speed:47 mm; Maximum Volume Flow:Uncoated; Control Pressure Measurement:Round; Control Fluid Drain:Steel; Displacement, geometric, per revolution:Single Shield; Rate Of Pressure Change:47 mm; Case volume:Single Row Non-Fill Slot; Drive Speed:2.5 mm; Sequence Valve:C0; Moment of inertia rotary group:DIN 625-1; Torque:-30 to +120 °C; Maximum Torque:63; Power:174000 N; |
Rexroth SL30GB1-4X/ check valve | Flow:100 mm; Power:135000 N; Nominal Resistance:215 mm; Torque:ABEC 1 (ISO Class Normal); Maximum Volume Flow:47 mm; Drive Speed:Uncoated; Determining Operating Characteristics:Round; Pressurefree Operation:Steel; Case volume:Single Shield; Maximum Axial Force At Standstill:47 mm; Drive Power:Single Row Non-Fill Slot; Voltage:2.5 mm; Rotary stiffness:C0; Displacement, geometric, per revolution:DIN 625-1; Maximum Torque:-30 to +120 °C; Load Pressure:63; Maximum rotational speed:174000 N; |
Rexroth 4WMM6E.J.H.5X/F check valve | Weight (approx.):100 mm; Drive Speed:135000 N; Maximum Permissible Pilot Pressure:215 mm; Nominal Resistance:ABEC 1 (ISO Class Normal); Maximum Permissible Speed (limit Speed):47 mm; Power:Uncoated; Control Pressure Measurement:Round; Maximum Torque:Steel; Pilot Pressure:Single Shield; Control Fluid Drain:47 mm; Sequence Valve:Single Row Non-Fill Slot; Moment of inertia rotary group:2.5 mm; Torque:C0; Load Pressure:DIN 625-1; Pressurefree Operation:-30 to +120 °C; Displacement, geometric, per revolution:63; Maximum Axial Force At Standstill:174000 N; |
Rexroth SL30PB1-4X/ check valve | Rotary stiffness:100 mm; Flow:135000 N; Pilot Pressure:215 mm; Pressurefree Operation:ABEC 1 (ISO Class Normal); Maximum Permissible Pilot Pressure:47 mm; Control Fluid Drain:Uncoated; Drive Power:Round; Maximum Permissible Speed (limit Speed):Steel; Weight (approx.):Single Shield; Nominal Resistance:47 mm; Displacement, geometric, per revolution:Single Row Non-Fill Slot; Load Pressure:2.5 mm; Moment of inertia rotary group:C0; Maximum Volume Flow:DIN 625-1; Maximum angular acceleration:-30 to +120 °C; Determining Operating Characteristics:63; Maximum rotational speed:174000 N; |
Rexroth SV30GB1-4X/ check valve | Maximum Axial Force At Standstill:100 mm; Rate Of Pressure Change:135000 N; Flow:215 mm; Maximum Torque:ABEC 1 (ISO Class Normal); Load Pressure:47 mm; Maximum Permissible Speed (limit Speed):Uncoated; Maximum angular acceleration:Round; Control Fluid Drain:Steel; Determining Operating Characteristics:Single Shield; Control Pressure Measurement:47 mm; Torque:Single Row Non-Fill Slot; Displacement, geometric, per revolution:2.5 mm; Moment of inertia rotary group:C0; Rotary stiffness:DIN 625-1; Maximum Permissible Pilot Pressure:-30 to +120 °C; Weight (approx.):63; Maximum rotational speed:174000 N; |
Rexroth 4WMM6G.M.T.U.R.F.P.Q.W.L.5X/ check valve | Weight (approx.):100 mm; Torque:135000 N; Pressurefree Operation:215 mm; Maximum rotational speed:ABEC 1 (ISO Class Normal); Displacement, geometric, per revolution:47 mm; Load Pressure:Uncoated; Pilot Pressure:Round; Maximum Volume Flow:Steel; Drive Power:Single Shield; Maximum Axial Force At Standstill:47 mm; Maximum angular acceleration:Single Row Non-Fill Slot; Maximum Torque:2.5 mm; Drive Speed:C0; Maximum Permissible Pilot Pressure:DIN 625-1; Nominal Resistance:-30 to +120 °C; Voltage:63; Sequence Valve:174000 N; |
Rexroth 4WMM6G.M.T.U.R.F.P.Q.W.L.5X/F check valve | Drive Power:100 mm; Rate Of Pressure Change:135000 N; Pilot Pressure:215 mm; Voltage:ABEC 1 (ISO Class Normal); Torque:47 mm; Displacement, geometric, per revolution:Uncoated; Maximum Permissible Speed (limit Speed):Round; Control Pressure Measurement:Steel; Maximum Axial Force At Standstill:Single Shield; Maximum rotational speed:47 mm; Sequence Valve:Single Row Non-Fill Slot; Control Fluid Drain:2.5 mm; Maximum Volume Flow:C0; Nominal Resistance:DIN 625-1; Case volume:-30 to +120 °C; Weight (approx.):63; Flow:174000 N; |
Rexroth SV30PB1-4X/ check valve | Weight (approx.):100 mm; Rotary stiffness:135000 N; Determining Operating Characteristics:215 mm; Torque:ABEC 1 (ISO Class Normal); Rate Of Pressure Change:47 mm; Nominal Resistance:Uncoated; Control Pressure Measurement:Round; Maximum Permissible Speed (limit Speed):Steel; Drive Power:Single Shield; Maximum Torque:47 mm; Maximum Axial Force At Standstill:Single Row Non-Fill Slot; Flow:2.5 mm; Sequence Valve:C0; Control Fluid Drain:DIN 625-1; Displacement, geometric, per revolution:-30 to +120 °C; Moment of inertia rotary group:63; Maximum rotational speed:174000 N; |
Rexroth WMM6A.B.C.D.Y5X/F check valve | Maximum Torque:100 mm; Maximum Permissible Speed (limit Speed):135000 N; Pilot Pressure:215 mm; Maximum Axial Force At Standstill:ABEC 1 (ISO Class Normal); Nominal Resistance:47 mm; Displacement, geometric, per revolution:Uncoated; Maximum rotational speed:Round; Sequence Valve:Steel; Drive Speed:Single Shield; Maximum angular acceleration:47 mm; Flow:Single Row Non-Fill Slot; Weight (approx.):2.5 mm; Moment of inertia rotary group:C0; Rate Of Pressure Change:DIN 625-1; Load Pressure:-30 to +120 °C; Drive Power:63; Rotary stiffness:174000 N; |
Rexroth 4WMM6A.B.C.D.Y5X/ check valve | Rate Of Pressure Change:100 mm; Maximum Volume Flow:135000 N; Voltage:215 mm; Drive Power:ABEC 1 (ISO Class Normal); Rotary stiffness:47 mm; Load Pressure:Uncoated; Weight (approx.):Round; Sequence Valve:Steel; Control Pressure Measurement:Single Shield; Drive Speed:47 mm; Pressurefree Operation:Single Row Non-Fill Slot; Case volume:2.5 mm; Displacement, geometric, per revolution:C0; Maximum rotational speed:DIN 625-1; Control Fluid Drain:-30 to +120 °C; Torque:63; Maximum Permissible Speed (limit Speed):174000 N; |
Rexroth 4WMM6......./V check valve | Moment of inertia rotary group:100 mm; Pressurefree Operation:135000 N; Nominal Resistance:215 mm; Drive Power:ABEC 1 (ISO Class Normal); Maximum angular acceleration:47 mm; Maximum rotational speed:Uncoated; Maximum Torque:Round; Sequence Valve:Steel; Maximum Permissible Speed (limit Speed):Single Shield; Rotary stiffness:47 mm; Rate Of Pressure Change:Single Row Non-Fill Slot; Displacement, geometric, per revolution:2.5 mm; Flow:C0; Determining Operating Characteristics:DIN 625-1; Control Pressure Measurement:-30 to +120 °C; Weight (approx.):63; Maximum Volume Flow:174000 N; |
Rexroth 4WMM6E.J.H.5X/ check valve | Maximum angular acceleration:100 mm; Maximum Axial Force At Standstill:135000 N; Maximum Volume Flow:215 mm; Rate Of Pressure Change:ABEC 1 (ISO Class Normal); Determining Operating Characteristics:47 mm; Control Fluid Drain:Uncoated; Drive Power:Round; Case volume:Steel; Maximum Permissible Speed (limit Speed):Single Shield; Control Pressure Measurement:47 mm; Load Pressure:Single Row Non-Fill Slot; Maximum Torque:2.5 mm; Voltage:C0; Pilot Pressure:DIN 625-1; Nominal Resistance:-30 to +120 °C; Sequence Valve:63; Flow:174000 N; |
Check valves | Bosch Rexroth AG
Check valve · Z1S 6. Size 6; Component series 4X; Maximum operating pressure 350 bar; Maximum flow 40 l/min. Data sheet · Operating Instructions
Check valve | Bosch Rexroth AG
Check valve. Z1S 10. Size 10; Component series 4X; Maximum operating pressure 350 bar; Maximum flow 100 l/min. Order
Check Valves - Rexroth | Bosch Rexroth
S model check valves have a poppet design for reliable, leak-free operation. they are in-line mounted. Ports are "/12" for SAE or G-pipe threads. This new series
Check valves, pilot operated | Bosch Rexroth AG
Check valves, pilot operated. Z2S 10. Size 10; Component series 3X; Maximum operating pressure 315 bar; Maximum flow 120 l/min. Order
Check valves | Bosch Rexroth USA
Check valve · Z1S 6. Size 6; Component series 4X; Maximum operating pressure 5100 psi; Maximum flow 10.6 gpm. Data sheet · Operating Instructions
Check valves - Bosch Rexroth
Check valve · Z1S 6. Size 6; Component series 4X; Maximum operating pressure 350 bar; Maximum flow 40 l/min. Data sheet · Operating Instructions
Check Valve, hydraulically pilot operated - Rexroth | Bosch
The SV and SL valves are hydraulic pilot operated check valves of poppet type design which may be opened to permit flow in the reverse direction. These valves
Check valve | Bosch Rexroth AG
Check valve. S6…S30 A..-1X/... Size 6 … 30; Component series 1X; Maximum operating pressure 450 bar; Maximum flow 450 l/min. Order
Rexroth Z2S16-1-5X/V check valve Video
Contact Us
- TMA Hydraulic Pump Equipment Manufacturing Co., Ltd.
- AddressWellington Crescent, Fradley Park, Lichfield, Staffordshire, WS11 8RZ, UK
Rexroth Z2S16-1-5X/V check valve Technical Articles
Do you need to prime a hydraulic pump? |
Does a pump increase pressure? |
What are the 5 basic components of a hydraulic system? |
Rexroth check valve CATEGORIES
- Rexroth Solenoid directional valve
- Yuken Piston pump
- Rexroth PRESSURE RELIEF VALVE
- Rexroth Vane pump
- Yuken Double Vane pump
- DENISON vane pump
- Rexroth check valve
- Yuken pressure valve
- Danfoss Shut-off valves
- Rexroth Piston Pump
- Yuken single Vane pump
- Rexroth THROTTLE VALVE
- PAKER Piston Pump
- CAT injector
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector